Work Steps :
1. Make the cloth for seaming flat and put it underneath . Fix both
ends by adhesive tape or something else . |
2. The overlap width of the two pieces is about 3-mm , the width of
the nozzle of hot seaming machine . |
3. Put the machine nozzle between two overlap pieces . The
press-wheel should be at left side of nozzle . The nozzle also need
align with side of upper piece of cloth . |
4. Switch on the motor power and then adjust speed . |
5. Turn on the movement switch . |
6. Press heating power key to adjust temperature. |
7. Turn the bar by anticlockwise to fix the position to startup
automatic movement . The machine will go along with the overlap
path by itself . |
8. Turn the bar by clockwise to cease the automatic work . |
9. The operator should control the moving direction and make sure the
nozzle connect both with upper and under piece of cloth . |
Notice :
♦ Before weld , make sure the clothes are flat so that stick together smoothly .
♦ Adjust temperature to zero before turn off the heater.Switch off
after 5-10 minutes .
♦ If the surface cloth is dissolved and scorched or the cloth are
not sticked together, please stop to adjust the temperature or
speed .
♦ If the seaming part is not in right position, please stop to
adjust fixing position .
♦ The hot wind of heater cannot touch the press-wheel or the rubber
of press-wheel is easy to be burned down .
♦ Any part of this machine being bumped of fallen can cause some
damage impossible to be repaired.So please pay attention to carry
it.It is suggested to move the machine by manpower and put it down
carefully
♦ Please sweep away the anti-rust oil from the machine with
detergent and re-lubricate with light lubricating oil after
installation
♦ The place for installation must be flat and the floor is strong
enough to support the machine and moreover, the installation place
should close to power supply
♦ Please check if there is damage or missed parts after unpack the
machine.Any problem, please contact us or the local agent
immediately
♦ Keep the installation place no dust and avoiding sunshine
Please Feedback Me To Get More Information .
Company Information :
ShenZhen MingYang Digital Technology Co.,Ltd
Our company inception in 2010, has been committed to production and
sales of advertising equipment, heat transfer equipment and
materials. Our products include PVC banner welding machine, eyelet
punching machine, digital printer, heat transfer machine, UV
flatbed printer, cutting plotter and other advertising equipment.
We export to Southeast Asia, the Middle East, Africa, Europe,
America and other parts of the world and gain fame from Chinese and
foreign clients.
Our comapny assure you :
With good quality Flex Banner Welding Machine
Timely offer the best price to you
Arrange the fast and safe shipping
Provide one year good after-sales service
|
FAQ :
Q : What's the function ?
A : It's weld waterproof tent , flex banner and other outdoor
materials that can be hot melt .
Q : Are the work speed and temperature adjustable ?
A : Yes , the work speed and temperature are adjustable , the weld
speed is 1-15m/min , the temperature range is 10-600 degree .
Q : Is it automatic work ?
A : Yes , It's Automatic weld with three wheels , automatic work
speed is 1-15 m/min .
Q : Which kinds of hot air gun does it use ?
A : It use 1600W Leister hot air gun , long life and high quality .
Q : How long is the warranty period ?
A : Our company provide one year free Warranty .
Buyer Feedback :
If any questions about our Auto Hot Air PVC Plastic Banner Welding
Machine , Please send your kind Inquiry Details at the below ,
Click " Send " Now Or Contact me Now !
Feedback Here To Get Price
