1). Before hemming or welding, leave 30-40mm wide overlap edge for
connection the two disjunct surface pieces, immobilize both ends of
each disjunct pieces with something such as stick belt or clamp.
2). Turn on the power, according to quality and thickness of the
PVC banner, consider the ground circumstance, set the proper
termperature and speed, adjust the suitable hot-air blowing rate,
wait for machine hot up around 2 minutes.
3). Bring up the machine, place the rubber wheel at the end of the
overlap edge.
4). Turn the handle to left down, insert the welder nozzle into the
gap of two overlap pieces, then the machine will moving and seaming
automatic.
5). During welding, use the gripe to align the moving direction,
let the upper piece edge be in touch with the inner side of the
welder nozzle.
6). After the machine go pass the overlap edge to the end, the two
disjunct pieces will be joined together, then turn the welder
handle to right, it will stop moving.
7). Turn off the heater switch, wait the gun come to cold, then
turn off the power supply is ok.
8). ( Notice :) To prolong the electrothermal heater, after work it
is strongly advice that cooling the heater at first, then turn off
the power 5 minutes later. In case of the power suddenly be off,
should handle the welding gun away firstly, and close down the
temperature knob, nextly consider the problem of power supply.
9). To get better satisfied bonding effect, the ground of the
overlap pieces should be smoothly, hard and heat resistive. We
suggest that the operator may do some more test and practice using
some samples of the pieces to get the suitable speed and
temperature and hot-air blowing rate before operate it for seaming
formally
FAQ :
1. Q : What kinds of materials can it welding ?
A : Our Banner Welding Machine can welding PVC , PE , Flex , Banner
, Plastic and other outdoor materials can be hot melt .
2. Q : Is it automatic work ?
A : Yes , It have two aluminum wheel , automatic welding , high
efficient and easy to operation .
3. Q : What's the Delivery ways ?
A : We can delivery the goods to you by Air , Sea or Express (DHL ,
TNT , EMS , UPS ...)
4. Q : How can i pay ?
A : Our company accept : T/T , Paypal , Western Union .
5 . Q : How to contact us ?
A : Please send your Inquiry Details at the below , Thank you !
